Serving Georgetown, Texas
Serving Georgetown, Texas
You finish mowing, put the mower away, and everything looks great. Then the sprinklers run the next morning and you spot a geyser in the front yard, a soggy patch by the driveway, or a strip of grass slowly turning brown. In many cases, the cause is the lawn mower — and you may be in need of sprinkler repair in Georgetown.
Sprinkler heads sit at ground level, and that makes them easy to hit. A mower blade can clip a pop-up head that didn’t fully retract. A wheel can crush a head that has sunk below the turf. Even a string trimmer can chew through a nozzle in seconds. Here in Georgetown, where Central Texas heat makes reliable watering essential, one damaged head can waste water, raise your utility bill, and leave dead spots in your lawn.
The good news is that you can spot most mower damage yourself in under an hour. This guide shows you how to inspect your sprinkler heads step by step, which warning signs to look for, and when it’s time to call a professional for sprinkler repair in Georgetown.
Sprinkler heads are built to handle water pressure, not a spinning steel blade or a heavy riding mower. A few common situations lead to damage:
Knowing these causes makes it easier to know where to look first.
You don’t need special tools for a basic check. Gather these items before you start:
Start with a visual check while the system is off. Walk each zone slowly and look for any head you can see above the grass. Heads that stick up are the ones most likely to have been hit. Look for chipped plastic, scrape marks, or bits of broken material in the grass nearby.
Place a flag next to each sprinkler head as you find it. This helps you keep track of every head in a zone, and it shows you where heads may be missing or buried. If you know a zone has eight heads but you only find seven, one may be hidden under turf or damaged beyond recognition.
Gently pull back grass and dig away a little soil around each head with your trowel. Wipe the top of the head with a rag. Damage often hides under clippings and dirt, so a clean surface makes cracks and chips much easier to see.
Go to your controller and run a manual cycle for a single zone. Running one zone at a time lets you focus on just those heads without getting soaked by the whole system. Stand back and watch each head pop up and start spraying.
As the water runs, check every head in the zone. Ask yourself:
Make a note of any head that seems off.
When the zone turns off, watch each head retract. A head that stays up or drops back slowly may have debris inside or a worn spring. Heads that stay up between cycles are the ones mowers hit most often.
Work through every zone the same way. Write down the zone number and location of each problem head. A clear list saves time whether you fix things yourself or bring in a pro.
Some damage is obvious. Other problems are easy to miss unless you know what to look for. Here are the most common warning signs.
The casing is the body of the sprinkler head, the part that sits in the ground. A mower wheel or blade can crack it, sometimes without leaving much visible damage on top. Watch for water seeping or bubbling from the ground around the head while the zone runs. You might also notice a constantly wet or muddy spot near the head, even on days the system doesn’t run much. A cracked casing usually means the whole head needs to be replaced.
The nozzle controls how water sprays from the head. When a blade clips it, you might see:
A missing nozzle wastes a large amount of water and can lower pressure for every other head in that zone.
A head doesn’t need to break to cause problems. If a mower knocks it sideways or pushes it down, it may spray onto your driveway, sidewalk, fence, or house instead of your lawn. Look for heads that tilt at an angle, sit lower than the surrounding ones, or spray water where it doesn’t belong. Over time, misaligned heads lead to dry patches in some areas and wasted water in others.
If several heads in one zone seem weak, the problem may not be with those heads at all. A single broken head, cracked riser, or damaged pipe can let water escape before it reaches the rest of the zone. Signs of low pressure include:
Low pressure is often a clue that you have a hidden leak somewhere underground.
Keep an eye out for these too:
Once your heads are in good shape, a few simple habits can protect them:
Some fixes are simple, but many types of mower damage go deeper than a cracked nozzle. Our team handles a full range of irrigation repairs to get your system back to working order.
We repair and replace broken or malfunctioning sprinkler heads, including spray heads and rotors. We also adjust head height and alignment so your new heads sit flush with the turf and spray exactly where they should. That helps prevent the same damage from happening again next time you mow.
When a mower crushes a head or a line breaks, the pressure change can affect the valves that control each zone. Faulty or leaking valves can cause zones that won’t turn on, zones that won’t shut off, or water seeping into the yard. We find the problem and repair or replace the valve so each zone runs as it should.
Heavy mowers can crack the riser or the underground pipe connected to a sprinkler head. These leaks often go unnoticed until you see soggy ground or a higher water bill. We locate and fix leaks in underground pipes so you stop losing water below the surface.
We also handle wiring, controller, solenoid, drip line, and backflow preventer repairs. If you face a major leak or burst pipe, our 24/7 emergency service can shut off your system and stop flooding fast.
Not every sprinkler problem is easy to see. Our diagnostic services help pinpoint the real cause, so you only pay to fix what’s actually broken.
We use advanced tools to find hidden leaks in pipes, risers, and fittings. This is especially helpful when you notice low pressure or wet spots but can’t find a damaged head.
We check your system to make sure it runs at the right pressure. Pressure that is too low leads to poor coverage. Pressure that is too high can stress heads and pipes and cause more breaks down the road.
We review how water spreads across your lawn to make sure every area gets even watering. If damaged or misaligned heads have created dry zones or overspray, coverage analysis shows exactly where adjustments are needed.
Many homeowners can clean a clogged nozzle or straighten a tilted head. But some situations call for an expert. Reach out to a professional if you notice:
A trained technician can fix the issue correctly the first time and spot related problems before they turn into costly repairs. That saves you time, water, and frustration.
A quick visual check once a month during the growing season works well. Do a full zone-by-zone inspection at the start of spring and any time you notice dry spots, wet areas, or a higher water bill.
You can replace a simple spray head if the riser and pipe are undamaged. If the casing is cracked deep in the ground, or if water leaks from below the head, it’s best to have a professional check the line.
Heads that sit too high or stick in the “up” position are the most common reasons. Adjusting head height and cleaning out debris usually solves the problem.
Yes. A missing nozzle or cracked head can release far more water than a working head and lower pressure across the whole zone. Fixing it quickly protects both your lawn and your water bill.
Lawn mower damage is one of the most common sprinkler problems we see in Georgetown, and it’s also one of the easiest to catch early. A regular inspection helps you spot cracked casings, broken nozzles, misaligned heads, and pressure drops before they lead to dead grass or wasted water.
If you find damage, or if something just doesn’t seem right with your system, we’re here to help. Our team offers expert sprinkler head repair, valve repair, pipe leak repair, and full diagnostic services to keep your lawn healthy and green all year long.
Contact us — Call now 512-580-4999.
